Field notes
What we find in plants, and what it is worth.
Notes from audits, measurement and the arithmetic behind the numbers. No vendor theatre — where something is an estimate, it says so.
Industrial pretreatment: the self-monitoring blind spot
Monthly or quarterly grab samples miss cleaning cycles and batch upsets. Under 40 CFR Part 403, industrial dischargers bear the compliance cost of that gap.
ReadAmmonia sensor drift in wastewater aeration control
How ammonium sensor drift degrades ABAC aeration control, wastes blower energy and creates nitrogen permit compliance gaps.
ReadpH sensor drift in activated sludge: operating cost
A pH electrode drifting 0.5 units in an activated sludge basin drives unnecessary chemical dosing and masks nitrification risk. What that costs in practice.
ReadNPDES nitrogen permit compliance: the DMR sampling gap
NPDES nitrogen permits assess compliance from a handful of sampled days. The unsampled days are invisible to the DMR. Here is why that gap matters.
ReadWastewater blower VFD: why energy savings erode
DO sensor drift silently reverses VFD energy savings at wastewater plants. Here are three historian patterns that expose the cause and how to fix it.
ReadDO sensor calibration intervals in activated sludge
DO sensor calibration intervals in activated sludge should match your process fouling rate, not the manufacturer default. Here is the historian method.
ReadCooling tower blowdown: conductivity control
Conductivity sensor drift triggers premature blowdown, wasting makeup water and chemicals. Here is what it costs and how to detect it in your data.
ReadThe $1.5M sewer repair: what discharge monitoring missed
Guest column by Alex Towfigh in Water Online on a $1.5M restitution case and what upstream monitoring could have shown about the discharge.
ReadIntermittent aeration: why DO sensor precision matters
DO sensor precision controls whether intermittent aeration for nitrogen removal saves energy or misses permit limits. Here is what happens when it drifts.
ReadData center WUE: what it measures and misses
WUE measures liters per kWh of IT load. It does not show where water goes, verify cooling controls, or prove tower savings for reporting.
ReadWastewater blower energy: cost and control
Aeration is 50 to 75% of a wastewater plant's electricity bill. What it costs per MGD, why savings erode, and how to cut blower energy without new equipment.
ReadWhy dairy plants miss their most costly process losses
Milk solids lost during transitions often go unmeasured. A Dairy Foods contributed article on spectral sensing and context for finding them.
ReadCalifornia data center water reporting
AB 2619 requires California data centers to report direct water use by source at renewal, under penalty of perjury. AB 2469 adds a Water Scarcity Plan by 2028.
ReadWhat 25 days of historian data reveals
A 25-day SCADA export found $42,000/yr in losses at an MBR plant with no site visit. Method, normalized energy benchmarks, and a six-step replication guide.
ReadAquaMesh physical AI: early detection for industrial plants
Connect published AquaMesh's 2026 physical AI announcement. This post explains what the platform does and why industrial plant operators are paying attention.
ReadWhy parallel equipment drifts and what it costs
Parallel blowers, pumps and process trains drift apart from filter fouling, wear and sensor mismatch. Here is what the gap costs and how to find it.
ReadSpectral change analysis versus calibrated parameters
UV-Vis probes measure absorbance spectra, not parameters. What that means for BOD, why calibration models drift, and when change detection is the better tool.
Read
Insights
Technical guides
Longer reference pieces on matching signals to decisions, by sector.
Rinse Water Control Systems for Metal Finishing
How a metal finishing rinse water control system works: conductivity control, flow and production context, and when another sensor is worth adding.
Industrial Water Reuse Monitoring Guide
A practical guide to matching flow, turbidity, ATP, lab tests and targeted sensing to the operating decisions in an industrial water reuse line.
Liquid Cooling Water Quality Decisions
A practical way to separate facility water and technology cooling loops, interpret existing water quality signals, and define an operator response.
UV/Vis Spectral Sensing and AI for Industrial Water
How UV/Vis spectral sensing and AI process analytics work together to detect product loss, trace causes and verify operator decisions, with validation limits.