MechTrack is a wireless sensor that listens to a machine three ways: vibration, ultrasound, and temperature. It mounts on the machines that keep a plant running and warns the maintenance team days ahead.
Illustrative scenario for a precision manufacturer: metal finishing, machining, coating, and heat treat. Modeled from industry benchmarks, not a verified customer result.
Bearing wear, imbalance, misalignment, looseness.
Early friction and poor lubrication, before vibration shows it.
Overheating and cooling failures.
Mounts with a magnet or stud. Learns each machine's normal, then flags what changes.
| Measures | Vibration, ultrasound, temperature, RPM, run time |
| Vibration | Up to 25.6 kHz sampling, ±16 g or ±64 g |
| Ultrasound | 30 to 120 dBµV, sampled up to 82 kHz |
| Temperature | ±1 °C accuracy |
| Range | Up to 2 miles line of sight, about 1,000 ft indoors |
| Battery | 3 to 10 years |
| Built for | IP67, magnet or stud mount, -40 °C to 70 °C |
| Role | Receives every sensor at a site; runs dashboards, alerts, and reports |
| Capacity | One gateway serves all sensors in range |
| Connectivity | 2 Ethernet ports, dual-band Wi-Fi, cellular option |
| Integrations | MQTT, REST API, AWS, Azure, Node-RED |
| Data | Stays on your network |
The full spec sheet is provided separately.
| Fault | Where it shows | Signal |
|---|---|---|
| Unbalance | 1x running speed, radial | Vibration |
| Misalignment | 1x and 2x, often axial; heat at the coupling | Vibration, temperature |
| Looseness | Harmonics of running speed | Vibration |
| Bearing wear | Bearing defect frequencies, then a broadband rise | Ultrasound, then vibration, then temperature |
| Lubrication loss | Rising ultrasound amplitude | Ultrasound |
| Gear wear | Gear mesh frequency with sidebands | Vibration |
| Overload, cooling loss | Sustained temperature rise | Temperature |
Fault classes match the DOE FEMP O&M guide: vibration (Section 6.5.3), ultrasound (6.4), bearing temperature (6.2). Frequency locations follow standard vibration analysis practice.
At 82 kHz sampling, ultrasound bandwidth reaches about 41 kHz, which covers the 28 to 32 kHz band DOE cites for early bearing warning.
One sensor for motors, spindles, pumps, fans, gearboxes, and compressors, across the whole plant.
Ultrasound picks up added friction first. Days later, vibration at the bearing frequency starts to climb, at the same speed and load.
A developing bearing fault, well before any machine alarm.
The maintenance lead approves a swap in the weekend changeover. No scrap, no emergency.
Targets are in line with the DOE benchmarks further down, and are confirmed against a customer baseline.
Industry average savings for predictive maintenance, as reported in the DOE FEMP O&M Best Practices Guide (Section 5.4). The guide attributes them to independent surveys and does not name the study.
Comparison of four maintenance programs for pumps (Piotrowski 2001), as cited in the DOE FEMP guide, Sections 5.6 to 5.9.
Machine-driven processes, including pumps, fans, compressed air, and materials handling, used 68% of U.S. manufacturing electricity in 2010 (DOE Advanced Manufacturing Office).
An infrared scan showed one pump's lower thrust bearing running hotter than the other. The pump was mounted vertically, which overloaded that bearing. Repeated failures cost $15,000 in repairs, before lost production (DOE FEMP guide, Section 6.2.6).
These are industry averages. We confirm them against your own baseline.
Sources: DOE FEMP O&M Best Practices Guide, Release 3.0, Chapter 5 · Chapter 6 · DOE Motor System Market Assessment
Tell us your critical machines. We will show where MechTrack goes and what it should catch.